AVE Serie 102 in TS2014
AVE Serie 102 in TS2014
I don't speak Spanish but hopefully some kind soul can help me out...
I have installed the Madrid Valencia v2.5 route and the AVE Class 102 in TS2014 but when launching any of the Free Roam scenarios I get the errors "CAN'T LOAD RAIL VEHICLE-ES_PATO EXTERNO COCHE CLUB" & "CAN'T LOAD RAIL VEHICLE-ES_S102_COCHE PREFERENTE". The AVE Class 130 works fine.
I have searched through forums including this one with the help of google translator and come up with no solution. The Spanish routes + rolling stock look great and really want to use them!
Any tips would be greatly appreciated.
Gracias,
Paul
Hola Gente
I don't speak Spanish but hopefully some kind soul can help me out...
I have installed the Madrid Valencia v2.5 route and the AVE Class 102 in TS2014 but when launching any of the Free Roam scenarios I get the errors "CAN'T LOAD RAIL VEHICLE-ES_PATO EXTERNO COCHE CLUB" & "CAN'T LOAD RAIL VEHICLE-ES_S102_COCHE PREFERENTE". The AVE Class 130 works fine.
I have searched through forums including this one with the help of google translator and come up with no solution. The Spanish routes + rolling stock look great and really want to use them!
Any tips would be greatly appreciated.
Gracias,
Paul
It could be by one of this two reasons:
- You are trying to use an scenario for the LAV Route with the "old" S-102.
- You haven't got the European Loco & Asset Pack, from Steam Store
The first S-102 used some files from the SEC Train, a free train by RSC when TS 2012 had launched.
Later, we have noticed problems with this with pepole who hasn't TS 2012, and discovered that the SEC wasn't on the Asset Packs on Steam Store. So, the train was "updated" for don't use SEC files and use files in the European Asset Pack.
You can try to download the S-102 from the library, and then test. If the problem persists, the scenario that are you trying to use is outdated and can't be used
Hello
It could be by one of this two reasons:
- You are trying to use an scenario for the LAV Route with the "old" S-102.
- You haven't got the European Loco & Asset Pack, from Steam Store
The first S-102 used some files from the SEC Train, a free train by RSC when TS 2012 had launched.
Later, we have noticed problems with this with pepole who hasn't TS 2012, and discovered that the SEC wasn't on the Asset Packs on Steam Store. So, the train was "updated" for don't use SEC files and use files in the European Asset Pack.
You can try to download the S-102 from the library, and then test. If the problem persists, the scenario that are you trying to use is outdated and can't be used
I do have the European Asset Pack and TS2014 is a fresh install done in January, though my original purchase was TS2012 in October 2011.
How do I tick the Kuju/RailSimulator or RSC/SECPack in the Editor? I have never dug this deep into the software! After this is done, do I reinstall the AVE Class 102 from the rwp?
I am using the download from this site:
https://www.railsim.es/libreriarw/download.php?id=60
Which was done a week ago.
Gracias,
Paul
Thanks for the replies.
I do have the European Asset Pack and TS2014 is a fresh install done in January, though my original purchase was TS2012 in October 2011.
How do I tick the Kuju/RailSimulator or RSC/SECPack in the Editor? I have never dug this deep into the software! After this is done, do I reinstall the AVE Class 102 from the rwp?
I am using the download from this site:
https://www.railsim.es/libreriarw/download.php?id=60
Which was done a week ago.
Gracias,
Paul
To enable providers/products look at this tutorial:
http://railworks.wikia.com/wiki/How_to_a...r_scenario
This error probably appears when you are trying to play a free roam scenario which was created to an old version of the route.
Try to make your own scenario or download a scenario for the last version of the route.
You can find scenarios like this: https://www.railsim.es/public/phpbb3/view...=10&t=1314
Search for them in this forum
Make sure that was made for the correct version of the route.
Regards,
Alberto
Hello dx5137.
To enable providers/products look at this tutorial:
http://railworks.wikia.com/wiki/How_to_a...r_scenario
This error probably appears when you are trying to play a free roam scenario which was created to an old version of the route.
Try to make your own scenario or download a scenario for the last version of the route.
You can find scenarios like this: https://www.railsim.es/public/phpbb3/view...=10&t=1314
Search for them in this forum
Make sure that was made for the correct version of the route.
Regards,
Alberto
1 invitado(s)
1 invitado(s)